Skip to main content
Gladen Rcore1|600 Mono amplifier, image 1
Gladen Rcore1|600 Mono amplifier, image 2
Gladen Rcore1|600 Mono amplifier, image 3
Gladen Rcore1|600 Mono amplifier, image 4
Gladen Rcore1|600 Mono amplifier, image 5
Gladen Rcore1|600 Mono amplifier, image 6
Gladen Rcore1|600 Mono amplifier, image 7
Gladen Rcore1|600 Mono amplifier, image 8
  • Gladen Rcore1|600 Mono amplifier, image 1
  • Gladen Rcore1|600 Mono amplifier, image 2
  • Gladen Rcore1|600 Mono amplifier, image 3
  • Gladen Rcore1|600 Mono amplifier, image 4
  • Gladen Rcore1|600 Mono amplifier, image 5
  • Gladen Rcore1|600 Mono amplifier, image 6
  • Gladen Rcore1|600 Mono amplifier, image 7
  • Gladen Rcore1|600 Mono amplifier, image 8

Mono amplifier

Gladen Rcore1|600

  • 1-channel amplifier
  • Class D technology
  • Stable at 2 ohms
  • 620 watts

Overview Gladen Rcore1|600

The RC1|600 is a dedicated mono amplifier designed for subwoofer applications where control, stability, and continuous power output are paramount. The Class D amplifier delivers high efficiency while ensuring precise reproduction of low frequencies—ideal for high-performance bass systems in daily use.

Thanks to its high-level and low-level inputs, the RC1/600 can be integrated into both OEM and aftermarket setups. The analog controls allow for quick and intuitive adjustment directly on the unit, without the need for additional software.

Key features:

  • Class-D mono power amplifier
  • Stable operation at low impedances
  • Variable low-pass filter for precise subwoofer connection
  • Subsonic filter to protect the speaker
  • Adjustable bass boost for targeted level adjustment
  • RTC connection


Matching products for Gladen RCore 1|600

Technical Data gladen RC1|600

Output power:

  • Output power at 4 ohms:

    395 watts

  • Output power at 2 ohms:

    620 watts


Data:

  • Input voltage:

    0,4V-10V Highlevel | 0,2V-5V Lowlevel

  • Frequency range:

    10-220Hz

  • Lowpassfilter:

    40-220hz/ 24db/Oct

  • Subsonic:

    20-50hz/ 24db/Oct

  • Bassboost:

    -6 / 0 / +6db

  • Efficiency above all else:

    > 80 %

  • Auto-On (only High Level):

    Off-BTL

  • Operating voltage:

    10-16 volts

  • Start/Stop:

    7,5 volts / 3 sec

  • External fuse:

    40 A

  • Dimensions:

    198 x 150 x 52 mm

  • Weight:

    1150 gramm


Downloads GLADEN RCore1|600


Product safety and manufacturer information

Manufacturer within the meaning of Regulation (EU) 2023/988: Gladen Europe GmbH, Bertha-Benz-Str. 9, 72141 Walddorfhaeslach, Germany
Email: info@gladen.com
WEEE reg. no. DE30475144

Safety information

  • Observe the operating voltage: depending on the version, the unit is designed for 12 V or 24 V (see type plate and technical data). Operation at any other voltage damages the unit.
  • Ensure adequate ventilation. Do not cover the unit or install it under carpet, damping material or cargo. The housing can get hot during operation.
  • Choose the fuse rating by cable cross-section, not by amplifier power. Main fuse no more than 40 cm from the battery positive terminal.
  • Speaker impedance and bridged operation only as stated in the manual. Too low an impedance overloads the unit.
  • Screw the unit down firmly; do not fix it with hook-and-loop tape or cable ties alone.
  • Installation by qualified persons only. Disconnect the battery as specified by the vehicle manufacturer before starting work.
  • Do not mount in airbag deployment zones, in the driver's field of view or above the footwell or pedals.
  • Do not work on high-voltage systems of hybrid and electric vehicles. Do not touch orange cables.
  • For dry interiors of road vehicles only. Not for marine, trailer, outdoor or wet-area use.
  • High volume can permanently damage your hearing and mask warning signals, sirens and announcements.
  • Units with DSP: make adjustments only while the vehicle is stationary. Afterwards check that warning signals, parking aids and announcements remain audible. Update firmware only with the file released for the model and not with a weak battery.

Full safety and installation instructions: manual in the download area. Product safety questions or reports: Product safety page or info@gladen.com.

FAQ | Frequently Asked Questions

Here you will find an overview of frequently asked questions.

Downloads

Overview of all downloadable files, such as data sheets or software.

Distributors

International Gladen Mosconi distributors sorted by countries

GLADEN MOSCONI Logo

GLADEN EUROPE GmbH
Bertha-Benz-Str. 9
72141 Walddorfhäslach
Germany
Phone +49 7127 8102820
Email: info@gladen.com


© 2026 GLADEN EUROPE GmbH | All rights reserved.