Plug&Play speaker adapter

SoundUp SU-TE-TW-CON

For Tesla Model 3 and Model Y
For the front tweeters
Plugs into the factory connector, no cutting of vehicle wiring
Spade receptacles: red positive 6.3 mm, black negative 2.8 mm
Length 15 cm
2 adapters per set

SoundUp SU-TE-TW-CON

The SoundUp SU-TE-TW-CON speaker adapter set connects aftermarket front tweeters in the Tesla Model 3 and Model Y to the factory connectors. Depending on the model, the tweeters are in the A-pillars or dashboard. Each adapter connects the factory connector to the new tweeter through two spade receptacles.

The set contains two adapters, each 15 cm long, one for each side. You can connect both front tweeters without cutting or modifying the vehicle wiring.

Plug in instead of cutting

The vehicle plug fits the factory connector at the tweeter. There is no need to cut, solder, or crimp the vehicle wiring. To return to the original setup later, simply reconnect the factory tweeter.

Clear polarity

The red wire ends in a 6.3 mm spade receptacle for positive, the black wire in a 2.8 mm spade receptacle for negative. The different widths help identify the correct speaker terminals and reduce the risk of reversed polarity.

Separate adapter for the woofers

For the front door woofers, use the matching SoundUp SU-TE-M3-WO-CON adapter. This woofer adapter is also included in the SoundUp sets for Tesla vehicles.

Technical data SoundUp SU-TE-TW-CON

Item number:

SU-TE-TW-CON
EAN:

4260242466149
Vehicles:

Tesla Model 3 and Tesla Model Y
Installation location:

Front tweeters (left and right), in the A-pillar or dashboard depending on the model
Vehicle side:

Tesla-specific 2-pin plug, fits the factory tweeter connector
Speaker side:

2 spade receptacles: red = positive (6.3 mm), black = negative (2.8 mm)
Wires:

Red and black, twisted
Length per adapter:

15 cm
Scope of delivery:

2 adapters (one per side)