Plug&Play speaker adapter

SoundUp SU-TE-M3-WO-CON

For Tesla Model 3 and Model Y
For the front door woofers
Plugs into the factory connector, no cutting of vehicle wiring
Spade receptacles: red positive 6.3 mm, black negative 2.8 mm
Length 37 cm
2 adapters per set

SoundUp SU-TE-M3-WO-CON

The SoundUp SU-TE-M3-WO-CON speaker adapter set lets you connect aftermarket woofers in the front doors of the Tesla Model 3 and Model Y directly to the factory connector. One end plugs into the vehicle's speaker connector, while the other has two spade receptacles for the new woofer.

The set contains two adapters, each 37 cm long, one for each door. There is no need to cut or modify the vehicle wiring.

Plug in instead of cutting

The vehicle plug fits the factory connector in the door. There is no need to cut, solder, or crimp the vehicle wiring. If you want to restore the original setup later, simply plug the factory speaker back in.

Clear polarity

The red wire ends in a 6.3 mm spade receptacle for positive, the black wire in a 2.8 mm spade receptacle for negative. The different widths help identify the correct speaker terminals and reduce the risk of reversed polarity.

Matching adapter for the tweeters

The matching SoundUp SU-TE-TW-CON adapter is designed for the front tweeters in the A-pillar or dashboard, depending on the model. The SoundUp SU-TE-M3-WO-CON is also included in the SoundUp sets for Tesla.

Technical data SoundUp SU-TE-M3-WO-CON

Item number:

SU-TE-M3-WO-CON
EAN:

4260242465845
Vehicles:

Tesla Model 3 and Tesla Model Y
Installation location:

Front door woofers (left and right)
Vehicle side:

Tesla-specific 2-pin plug, fits the factory speaker connector in the door
Speaker side:

2 spade receptacles: red = positive (6.3 mm), black = negative (2.8 mm)
Wires:

Red and black, twisted
Length per adapter:

37 cm
Scope of delivery:

2 adapters (one per door)