MOSCONI PRO EVO: Nine HI-END amplifiers from the 900 W monoblock to the 8-channel DSP amp
You want real drive for your subwoofer and clean playback from your front stage. Perhaps you want to run the whole car active. With nine HI-END amplifiers, MOSCONI PRO EVO gives your system idea a place to start.
Two Class D models put subwoofer power at the center of your build. The PRO 1|10 EVO delivers up to 1600 W into 2 Ω. For more power in bridged operation, the PRO 2|30 EVO provides 1650 W bridged. Want to power the whole system with one amplifier? The PRO 5|30 EVO combines Class AB channels with a 660 W subwoofer channel.
The output-stage design deserves a closer look, too. Selected Class AB output stages use two identical N-channel MOSFETs instead of an N- and P-channel pair. These are in the PRO 2|10 EVO, PRO 4|10 EVO, PRO 5|30 EVO and PRO 8|30 DSP EVO. Both half-waves of the music signal are switched the same way. AAB models give each output MOSFET its own control loop. This keeps operating points stable and provides soft, progressive clipping.
For your active system, the PRO 8|30 DSP EVO combines amplification and tuning in one chassis. Tune its 12-channel DSP to your system on a PC via the USB port. High-level inputs with autosense and an optical input provide signal connection options.
Your music keeps playing through start-stop voltage dips, too. Every PRO EVO continues operating through dips to 7.5 V for 300 ms. Explore the product page to find the MOSCONI PRO EVO for your system.
- PRO 1|10 EVO: 1 x 900 W into 4 Ω
- PRO 2|10 EVO: 2 x 240 W into 4 Ω
- PRO 2|10 AAB EVO: 2 x 240 W into 4 Ω
- PRO 2|30 EVO: 2 x 550 W into 4 Ω
- PRO 4|10 EVO: 4 x 120 W into 4 Ω
- PRO 4|10 AAB EVO: 4 x 80 W into 4 Ω
- PRO 4|30 AAB EVO: 4 x 150 W into 4 Ω
- PRO 5|30 EVO: 2 x 95 W + 2 x 185 W + 1 x 660 W into 4 Ω
- PRO 8|30 DSP EVO: 4 x 90 W + 4 x 170 W into 4 Ω
