Skip to main content

1 channel high performance amplifier

Mosconi Pro 1|10

  • 1 channel amplifier
  • Class D technology
  • Power / sound mode
  • Up to 975 Watts @ 2 Ohm

Overview Mosconi Pro 1|10

The MOSCONI PRO 1|10 represents a special feature among the mono amplifiers. It is not only designed for use on the subwoofer, but can be used in the full frequency range. Thus, for example, with two PRO 1|10, a pair of speakers can be operated. In addition to the resulting brute overall performance, one benefits from a hundred percent channel separation.

When using an external digital sound processor, the DDSP circuit can bypass all internal filters and level controls to avoid distortion of the music signal.

  • DDSP - Direct DSP (bypassing all preamplifier circuits)
  • High level / low level selectable input
  • Single input capability (RCA bypass capability)
  • Autosense (only in BTL mode)
  • Power supply and temperature management controlled by microprocessor

Technical Data Mosconi Pro 1|10

Output Power:

  • Output power @ 4Ω (Sound mode):

    1 x 525 Watts

  • Output power @ 2Ω (Sound mode):

    1 x 830 Watts

  • Output power @ 4Ω (Power mode):

    1 x 670 Watts

  • Output power @ 2Ω (Power mode):

    1 x 975 Watts


  • Input sensitivity:

    0.14 V ÷ 5.9 V (3.1 V in DDSP mode)

  • Crossover:

    LOW PASS 43 ÷ 200 Hz [24 dB/Oct]

  • Dimensions:

    235 x 205 x 55 mm

  • Weight:

    2,5 kg

  • Signal to Noise Ratio:

    108 dB (ref: 600 Watts into 4 Ohm)

  • Housing:

    Available in black/silver finish


Mosconi Series

FAQ | Frequently Asked Questions

Here you will find an overview of frequently asked questions.


Overview of all downloadable files, such as data sheets or software.


International Gladen Mosconi distributors sorted by countries

Bertha-Benz-Str. 9
72141 Walddorfhäslach


© gladen mosconi | All rights reserved