Skip to main content
Gladen HTL10 Highlow Adapter, image 1
Gladen HTL10 Highlow Adapter, image 2
Gladen HTL10 Highlow Adapter, image 3
Gladen HTL10 Highlow Adapter, image 4
  • Gladen HTL10 Highlow Adapter, image 1
  • Gladen HTL10 Highlow Adapter, image 2
  • Gladen HTL10 Highlow Adapter, image 3
  • Gladen HTL10 Highlow Adapter, image 4

Highlow Adapter

Gladen HTL10

  • 2-channel high-low adapter for signal conversion
  • Galvanically isolated inputs for interference suppression
  • Integrated remote signal generation
  • Suitable for OEM radios and factory amplifiers

Overview Gladen HTL10

The GLADEN HTL10 is a high-quality, two-channel, high-low adapter designed for seamless integration of aftermarket amplifiers into modern vehicle audio systems. Designed for connection to OEM radios and factory amplifiers, it enables low-loss conversion of speaker signals to RCA signals.

Its galvanically isolated inputs reliably suppress interference, such as ground loops or high-frequency interference. This creates a stable signal base for clean further processing in the connected amplifier or digital signal processor (DSP).

The GLADEN HTL10 has integrated remote signal generation that works via BTL and signal detection at the input. This feature allows external amplifiers to switch on automatically and reliably.

Additionally, the GLADEN HTL10 can operate passively, enabling signal conversion without a connected 12-volt power supply. However, remote signal generation is not possible in this case. This feature provides maximum flexibility for system integration, making the HTL10 suitable for simple or powerless installation situations.

Thanks to its two-channel design, it is ideal for front and rear signals, as well as more complex, multi-channel OEM systems. It ensures system-compliant, reliable, and sonically neutral integration in demanding vehicle audio installations.


Technical data for the Gladen HTL10

  • Audio signal inputs:

    2

  • Audio signal outputs:

    2

  • Remote generation:

    BTL and SE

  • Operating voltage:

    12 volts

  • Housing:

    aluminium

  • Color:

    black



Matching products for HTL10

Product safety and manufacturer information

Manufacturer within the meaning of Regulation (EU) 2023/988: Gladen Europe GmbH, Bertha-Benz-Str. 9, 72141 Walddorfhaeslach, Germany
Email: info@gladen.com

Safety information

  • Do not mount holders or suction mounts in airbag deployment zones or in the driver's field of view.
  • Operate connected devices only while stationary. A loose holder can injure the driver and passengers.
  • Tighten clamps and terminals to the torque stated in the manual and retighten after a short period of use.
  • Keep small parts away from children. Choking hazard.
  • Fit fuse holders only with fuses of the stated type and rating.
  • Installation by qualified persons only. Disconnect the battery as specified by the vehicle manufacturer before starting work.
  • Do not mount above the footwell or pedals.
  • Do not work on high-voltage systems of hybrid and electric vehicles. Do not touch orange cables.
  • For dry interiors of road vehicles only. Not for marine, trailer, outdoor or wet-area use.

Full safety and installation instructions: manual in the download area. Product safety questions or reports: Product safety page or info@gladen.com.

FAQ | Frequently Asked Questions

Here you will find an overview of frequently asked questions.

Downloads

Overview of all downloadable files, such as data sheets or software.

Distributors

International Gladen Mosconi distributors sorted by countries

GLADEN MOSCONI Logo

GLADEN EUROPE GmbH
Bertha-Benz-Str. 9
72141 Walddorfhäslach
Germany
Phone +49 7127 8102820
Email: info@gladen.com


© 2026 GLADEN EUROPE GmbH | All rights reserved.