Changelog MOSCONI Gladen GUI 

V2.51:
First release.

V2.61
USB driver detection and automatic installation.
Bugfix connection Comport-Number >9
start coding setup-wizard
different main EQ behavior
contains Firmware 3.27. Bugfix for output filter No. 10
new devices added
Contain _flow 1.01, Bugfix routing failure by using four main EQ
Little improvements by signal generator and RTA measuring
Frequency Chart can show more than one signal path.
External volume control signed (Block view)
Setup Wizard now works only with available channels (Devices < 12ch.)
Main bottom reworked - now an own button for each function.
Hotkeys added (only by measuring active)
F9 start RTA measuring
F10 Clear graph and redraw last measure
F11 Clear graph
Version /B Bugfix highlighting buttons
Dont use new bootloader for old devices.

V2.62
IN-EQ reworked
IN-Filter added.
dynamic funcion for IN-EQ and IN-Filter added
In-Delay max. now 5ms (PICO6|8 only)

V2.64
Bugfix In-EQ / Filter
In-EQ and Filter settings can hide and "locked by gladen"

V2.65
Public release.
Update files for all devices 
Color changed to dark mode
*** PLEASE NOTE: 8to12AERO 6to8AERO 8to12Pro - Update to FW 4.01 (dISC) not possible by GUI, contact your dealer or distributor ***

V2.66
changed behavior automatic activate Window
Contain FW 4.02 -> Adjusted volume range for dynamic EQ control (-10dB to -120dB / by measure -20dB to -120dB)
Frequency chart show High-EQ and In filter
Frequency chart now can show the real in EQ (dynamic)

V2.67
additional shortkeys:
ALT+X close the GUI
ALT+Q toggle between GUI and an external RTA (Audiotester / ARTA / REW)

V2.68
Adding db / db-max and voltage measuring in DSP monitor

V2.69
contain FW 4.03 for 8to12AS, 8to12Pro, 6to8AS
Bugfix routing mismatch by using RTA measuring with microphone

V2.70
New function: Copy In-EQ and filters from low volume to high volume and vice versa.
New function: Activate low- or high volume In-EQ and filters manuel (FW4.05 needed)
contain FW 4.05 for all devices. 

V2.71
Bugfix Measuring system - Atomo4|6 and PICO 6|8 left/right RTA swaped
New function for RCD - Input gain now can be controled by digital remote / RTC-hub and App
contain FW 4.06 for all devices. 

V3.03
New function Pha°C - measure, calculate and shift phase.
Setup Wizard now with online database for vehicles and speakers.
Fully touchscreen compatible
New, clear design. Improved usability. 
16:9 resolution 1360 pixels.
Basic / Pro mode

V3.08
New device PICO 8|10 DSP added.
Bass / Mid / Treble control for PICO 6|8 DSP, PICO 8|10 DSP and Atomo 4|6 DSP
New feature input signal analyser: Measure electrical sum and display phase graph.

V3.09
Wizard - Online Database for speaker and vehicles connected.
Wizard - All SoundUp sets included.
Tone control for all devices
Full support for non AKM redesign
Bugfix USB driver detection
Bugfix Bluetooth connection
Add Autostore and remember in dealer mode 

V3.11
YT video tutoials included.
Enhanced speaker protection by using microphone and malfunction.
Uart protocol "FF" exclude setting.
Default settings in measure menu adjusted. 
Labelling inputs more clearly.
Bugfix labeling inputs PICO 8|10DSP
New device PICO 4|8 DSP included.

V3.12
Bugfix frequency chart

V3.15
Pilot tone control support
Run as Admin option to speed up an more update safty
Fix a digital input as source (disable signal search) - (8to12 Aerospace / 6to8 Aerospace)
Improved FR measuring by high noisefloor (microphone)
Fix connection loss issue byyy sine sweep measuring.
FR measruing calibrated
Improved behavior "actual noisefloor" and dISC option "measured"
Decreased datarate in monitor mode
Minor bugfixes

V3.23
Pro 8|30 DSP added
Firmware 5.13 / Flow 5.00 for all devices included.
X-Over section additional to the 10 output filter.
Output filter now in 0.1dB steps.
imperial / metric units of lenght
normalized Fc by crossover
Separate mixer input for signal generator - button "Set Mixer" is omitted.
Calculator frequency / wavelength added
Pulse measurement improved
Pilot tone detection now possible at each input (detect on AUX Group)
Frequency chart with own color for each output.
Minor bugfixes

V3.24
Firmware 5.14 for Atomo 4|6, Pico 4|8 DSP, Pico 6|8 DSP, Pico 8|10DSP, Pro 8|30 DSP
Bugfix channel routing

V3.26
New device ONE 6|10 DSP included.
New option to copy preset: Copy to all.
FW 5.17: 
Fix popping noise on RCA out by low output level (Atomo 4|6, Pro 8|30).

V3.35
New device ONE 4|8 DSP included.
Measuring system prepared for binaural measuring system
"1 click measure"
automatice phase adjust
automatic EQ adjust
Individual target curve.
Minor bugfixes.

V3.40
New device ONE 8|10 DSP included.
Measuring system prepared for using with USB sound interface (RODE AI-Micro recommended)
Measuring system better usability
Minor bugfixes.

V3.42
Automatic setting output filter
Import for corrections microphones of other manufacturers
Automatic adjustment target curve
Auto Mute and Auto Target filter with Auto EQ and Auto Filter
Level adjusted at measurement side separated

V3.43
New device DSP 8|12 Aerospace
Support PICO Hardware update -2 (96k)
Extended controller communication
Support Over all RTA measuring incl. headunit (FW 5.20 and up)
V3.43B
Over all measuring support USB measuring
Minor bugfix input filters

V3.44
Offline Mode and Rescue FW uploader support new 96k devices.

V3.50
Menu bar for easy navigation.
Shortcuts reduced
Clear assignment of output groups
Switching delay / distance mode
Import function loads setups from other DSPs
Quick jump bar on the page for measurements
Reset functions for individual settings.
Stop function for Auto-EQ
Automatic setting remote control funtions for groups
Automatic procedure left/right/sum for AutoEQ and AutoFilters
Bugfix polarity reset (0/180°) by phase measuring
New Setup Wizard
New time measuring USB
New group "not used"
Over all measuring for time delay
REW import support
Filter / EQ Q calculation Mosconi classic (symmetric) or REW_RBJ (1/2 Q)
Store / recall for filters

Bugfix: Gain error with Auto-EQ / Auto-Filter
Bugfix: Input for measuring without function

V3.51
Bugfix Array in Wizard (User Label input)
Support new Pico series "V2" 6|8 and 8|10

V3.53
Support new Pico V2 4|8 DSP
All devices added in Launcher
One FW and Flow for all Pico V2
FW 5.24 reduce output power > 76°
Bugfix GUI close by low signal USB measuring 
Enhanced connection recovering

V3.54
Support new DSP 6|8 AERO
FW update 5.25 for all devices
Gladiator setup new design / debugged

V3.55
Support new DSP 4|8 ATOMO
Small improvements usability and measuring


